Nitro Miller Application Technologies

High Performance Power Package

72" Wheel Tread Width Adjustment 120"
50" Crop Clearance along with narrow leg profile

72" to 120" wheel spacing and crop clearance
Wheel tread adjustment from 72" to 120" with stops at 72", 76", 80", 88", 108" and 120". Operator and boom remain centered at all widths.
• Hydraulic wheel tread adjustment
• Front and rear wheels can be adjusted to track at different spacing
• 50" under body crop clearance (can vary with tire size and loads)

Precision product delivery system
• 800 gallon poly tank has full length sump and adjustable agitation. Optional 800 gallon stainless steel tank is available.
• Raven 460 rate controller with hydraulic flow control to manage pump volume
• Hypro 210 gpm @ 80 PSI
• Radar speed sensor
• 2" fast fill kit (3" optional)
• Raven precision farming technology products can be factory installed on all NITRO models

Fit and finish
Surfaces are prepped with media blasting. Epoxy primer and urethane top coat are applied for added protection and long lasting appearance. NitroSteel hydraulic cylinder shafts in steering and boom systems. Stainless steel hardware is used on boom and most frame hardware. Polyurethane clear coat is applied on all hydraulic fittings after assembly to prevent corrosion.

Front mount boom system
The N2XP is equipped with the same front boom system as the rest of the NITRO line, providing all the benefits of comfort, monitoring, control, accurate application and managing drift. Boom sizes range from 60' to 90'.

Multi-tasking extends the N2XP’s capabilities
The optional quick attach system allows the N2XP to be equipped with other front mounted toolbars for operations such as sidedressing liquid fertilizer, hooded spraying, swathing and more. The liquid system also has a quick-attach design for the addition of a dry spinner box.

Rear deck accessibility
The N2XP is equipped with a convenient work station at the rear of the sprayer. Accessories include: 100 gal. rinse tank, Richway Versa Trac™ foam marking, fast-fill connection, tank agitation and rinse valve, emergency product tank shut-off, remote engine rpm and product pump switches along with power connections for chemical transfer pumps. The entire product system is attached to the tank saddle for easy removal when changing to a dry system.

Steering and short turning radius
Hydrostatic power steering for smooth maneuvering and hassle-free wheel tread changes. Two steering cylinders with NO tie rods to adjust. Convenient 18 foot turning radius (depending on tires)

State of the art suspension
With long days being the norm during spray season, the N2XP has been equipped with a state of the art suspension for maximum operator comfort.
• 4 wheel independent strut suspension
• Integrated 4 wheel AirRide suspension with independent leveling valve system for each strut
• On-board engine driven air system
• Fully enclosed and pressurized strut system
keeps slide mechanism clean
• Deluxe AirRide seat
• Narrow leg profile for excellent crop clearance

Secure 4 wheel braking system
The N2XP features 4 wheel dynamic braking along with the traditional hydrostatic braking, ensuring positive stopping ability. 4 wheel parking brakes are standard.

High performance power package
The combination of a CUMMINS Tier III electronic fuel injected engine with 225 peak hp and Twin Eaton Torq-Trac™ hydrostatic drive pumps, coupled to 4 Poclain MW14 drive motors makes for an explosive delivery of power and torque. 3 shift-on-the-go speed ranges provide increased torque at low speeds and higher travel speeds:

Range 1...
0 to 12 mph

Range 2...
0 to 18 mph

Range 3...
0 to 35 mph

Large 4 Section Radiator
Side by side design. This allows for more efficient and cooler air flow through all 4 cores, along with easier service. Large diameter hydraulically driven adjustable pitch fan. Sections from left to right: air conditioner condenser, oil cooler, air to air after cooler and radiator.

CLICK HERE
for N2XP Specifications

MILLER HOME PAGE	7 511 E Main St. St. Nazianz, WI. 54232-0127 1.800.247.5557